Polaris RANGER TM Offroad Vehicle User Manual


 
52
EMISSION CONTROL SYSTEMS
Crankcase Emission Control System
This engine is equipped with a closed crankcase system. Blow-by
gases are forced back to the combustion chamber by the intake system.
The system does not allow the blow-by gases to enter the atmosphere.
Exhaust Emission Control System
The emissions from the exhaust of this vehicle are controlled by engine
design, including factory-set fuel delivery and ignition. The engine
and related components must be m aintained at Polaris specifications to
achieve optimal performance.
Adjustment to engine idle is the only adjustment Polaris recommends
that the operator perform. Any other adjustments should be performed
by an authorized Polaris dealer.
The RANGER TM emissions label (1) is located on the front of the
engine. Remove the service panel (2) to view the l abel. The label on
the RANGER 4X4 and 6X6 (3) is located on the recoil cover. Remove
the seat and l ook through the gap in the aluminum exhaust shield to
view the label.
WARNING
The installation of devices that effectively increase exhaust
emissions beyond their legal limits will void all manufacturer
warranties and may violate laws governing the registration and
operation of this vehicle.
1
3
2