Filter
Top Products
1
2
3
4
5
6
33
FEATURES AND CONTROLS
Brake Pedal (1)
Depress the brake pedal to slow or stop the vehicle.
Throttle Pedal (2)
Push the pedal down t o increase
engine speed. Spring pressure
returns the pedal t o the rest
position when released. Always
check that the throttle pedal
returns normally before starting
the engine. Make sure there’s
adequate throttle pedal freeplay.
See page 82 for throttle pedal
adjustment procedures.
Parking Brake Lever (3)
Engage the parking brake when parking the vehicle to help prevent the
vehicle from rolling. To apply the parking brake, push down on the
pedal with your foot.
Parking Brake Release (4)
To release the parking brake, pull the release handle Spring pressure
helps return the lever to t he released position. Make sure the parking
brake lever is functioning properly before each operation.
Differential Lock L ever (5) and Switch (6)
The rear axle is equipped with a
lockable differential that allows the
operator to choose between an open
differential or a closed d if ferential.
It’s beneficial to lock the differential
in low traction situations.
To lock the differential on the TM, push
the lock lever up.
To lock the differential on the 4X4,
move the AWD/Differential Switch to
the center position.
CAUTION
Damage to the differential c an occur if it is engaged while the
vehicle is traveling at high s peeds or while the rear wheels are
spinning. Slow the vehicle to nearly stopped before engaging the
differential.