Filter
Top Products
C4659M (4/10) 7
Introduction
The NET5400T Series video encoder is a network-based multichannel encoder with a built-in, Web-based viewer for live streaming to a standard
Web browser (Microsoft
®
Internet Explorer
®
or Mozilla
®
Firefox
®
). The encoder is built upon open standards and is part of an Endura
®
system for
recording, managing, administering, and viewing video streams.
The encoder supports H.264 and MJPEG compression. It can generate two independently configurable H.264 streams, each up to 4CIF resolution
(704 x 480 for NTSC, 704 x 576 for PAL) and 30/25 images per second (ips) in addition to an MJPEG stream for Web viewing.
The encoder includes 1-, 2-, and 4-channel units; some models support a full line of video analytics for object detection and activity detection.
The 1- and 2-channel models include built-in Power over Ethernet (PoE), which supplies power to the encoder through the network. If PoE is not
available, the encoder is prewired for 12 or 24 VAC, and can be powered from an optional external power supply or directly from an optional rack
mount.
The NET5400T can be configured for one alarm input for each video channel and provides one relay output for the unit. When an alarm event is
triggered, the unit can send a message to an operator, trigger a relay, and start recording video.
The unit also supports motion detection for each video channel. You can configure up to three motion zones, each with its own independent
sensitivity and threshold settings. When the NET5400T detects activity in any of these areas, it can trigger an alarm event.
The video encoder supports one audio input for each video channel over the network. The system operator (security personnel) can see and hear
activity in any target area in which a microphone is present.
The NET5400T supports control of remote peripherals such as pan/tilt/zoom (PTZ) cameras by way of Pelco D and Coaxitron
®
protocols.
FEATURES
• Open standards-based architecture
• H.264 baseline, main, or high profile compression
• Dual-stream at up to 4CIF, 30/25 images per second (ips) per stream
• Integrated multizone video motion detection
• Integrated audio, alarm, and relay outputs
• Integrated Coaxitron and Pelco D PTZ protocols
• Support for Power over Ethernet (PoE or PoE+) on 1- and 2-channel models
• Support for multicast transmissions
• Support for Pelco and Object Video analytics at the edge
BUILT-IN ANALYTICS
Designated NET5400T Series encoders are available with Pelco Analytic Suites or ObjectVideo
®
(OV) Suites. Analytics enhance the flexibility and
performance of Pelco cameras connected to the encoder.
Pelco Analytic Suites are capable of running several analytics at the same time. Up to three behaviors can run without interfering with other
encoder functions.
Pelco Analytic Suites are preloaded on the encoder and can be configured and enabled using a standard Web browser. The analytics are also
compatible with third-party systems that support Pelco’s Analytics API system. Refer to the specific product documentation for instructions on
how to configure and enable Pelco analytics with the API.