Filter
Top Products
C4659M (4/10) 17
REBOOTING THE ENCODER
1. Click the System tab.
2. Click the Reboot Encoder button to restart the encoder. Rebooting the encoder does not change the configured settings.
RESTORING ALL DEFAULT SETTINGS
This process cannot be undone; all user and custom settings will be lost.
1. Click the System tab.
2. Click the Restore All Encoder Defaults button to restore the factory default settings.
NOTE: If the encoder is not connected to a Dynamic Host Configuration Protocol (DHCP) network, the IP address settings for the encoder will be
lost and the server will not recognize the encoder. DHCP On is the default setting for the encoder IP address.
Refer to the following sections for more information:
• Selecting the Audio Configuration Settings on page 28
• Turning Off DHCP on page 19