Filter
Top Products
C4659M (4/10) 9
Operation
This section describes how to view live video on cameras connected to the NET5400T and how to configure the NET5400T. The following topics
are covered in this section:
• Viewing live video and setting the primary and secondary stream for camera video
• Taking a snapshot while viewing live video
• Changing the view mode to view one or more video streams simultaneously
• Selecting cameras to display on the Live View page and disconnecting video
• Configuring system settings, network settings, audio video streams, users and groups, and events
• Generating system logs
• Restarting the encoder
• Restoring default settings on the encoder
MINIMUM SYSTEM REQUIREMENTS FOR USING A WEB BROWSER
Network and processor bandwidth limitations might cause the video stream to pause or appear pixilated when an increased number of
Web-interface users connect to the camera. Decrease the images per second (ips), resolution, compression, or bit rate settings of the Web
interface video streams to compensate for network/processor limitations.
The following minimum system requirements are needed to use a Web browser with the IP camera:
Processor: Intel
®
Core
™
2 Duo microprocessor, 2.6 GHz
Operating system: Microsoft® Windows
®
XP, Windows Vista
®
, or Mac
®
OS X 10.4
Memory: 2 GB RAM
Network interface card: 100 megabits (or greater)
Monitor: Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color resolution
Web browser: Internet Explorer
®
7.0 (or later); Internet Explorer 8.0 (or later) is recommended for configuring analytics
Media Player: QuickTime
®
7.6.5 for Windows XP, Windows Vista, or QuickTime 7.6.4 for Mac OS X 10.4 (or later)
NOTE: This product is not compatible with QuickTime version 7.6.4 for Windows XP, Windows Vista. If you have this version installed on your PC,
upgrade to QuickTime version 7.6.5.
Refer to the following sections for more information:
• Compression Standards on page 25
• Available Camera Resolution on page 26
• Image Rate on page 26
• Bit Rate on page 26