Filter
Top Products
ADDENDUM
Addendum No. C4690M
Date March 8, 2011
Document Affected C4659M Endura
®
NET5400T Series Network Video Encoder Web Configuration and Operation Manual
Document Update This addendum contains additional feature information regarding the NET5400 Series network video encoder web
application.
Additions and Changes to Features in the Web Application
The following features have been added or changed in the NET5400T Series network video encoders.
ELECTRONIC PTZ OPERATION FROM THE LIVE VIEW PAGE
When a camera that supports PTZ operations is connected to a NET5400T Series encoder, additional PTZ controls appear on the Live View page. Use these
controls to zoom in or out on the scene or to reposition the camera up, down, right, or left. Additional controls let you refocus the lens and control the
amount of light on the scene. These controls are available after you log on to the device.
ACCESS TO CAMERA ON-SCREEN DISPLAY MENUS FROM THE ENCODER CONFIGURATION TAB
A camera’s on-screen display (OSD) menus can be accessed directly from the Encoder Configuration tab on the Settings page. You must log on to the device
before you can display OSD Configuration from the Settings page. Use the arrow keys on your keyboard to navigate through the menus. Press the Enter key
on your keyboard to make a menu selection.
CONFIGURATION AND OPERATION FOR PRESETS AND PATTERNS
Patterns and presets can be configured directly from the OSD for third-party cameras that support these features. Access the OSD from the Settings page of
the web application for the encoder. You can run patterns or presets from the Live View page of the web application. You must log on to the device to
configure or operate patterns and presets.
SUPPORT FOR SNMP FROM THE NETWORK TAB
Signaling Network Management Protocol (SNMP) is an available option for network settings on the encoder. SNMP is an application layer protocol used to
manage TCP/IP-based networks from a single workstation or several workstations. The encoder supports SNMP versions 2c and 3 and can be configured to
send data using a trap. SNMP V2c and SNMP V3 configuration settings are independent of each other, but only one SNMP version can be active at a time.
Zoom In: Click and hold the button to zoom the lens in.
Zoom Out: Click and hold the button to zoom the lens out.
Tilt Up: Click and hold the button to tilt the camera up.
Tilt Down: Click and hold the button to tilt the camera down.
Pan Left: Click and hold the button to pan the camera left.
Pan Right: Click and hold the button to pan the camera right.
Focus Near: Click and hold the button to focus on an object near the camera.
Focus Far: Click and hold the button to focus on an object far away from the camera.
Iris Close: Click and hold the button to close the iris and darken the image.
Iris Open: Click and hold the button to open the iris and lighten the image.