Olympus DM-520 Automobile Battery Charger User Manual


 
91
6
USB Microphone/USB Speaker
USB Microphone/USB Speaker
Windows
Macintosh
It is possible to use the recorder as a USB
microphone or speaker with the "Olympus
Sonority", to insert/add/overwrite
recordings onto voice files downloaded
onto a computer, or to save new recordings
directly onto a computer. In addition, it
is also possible to operate the "Olympus
Sonority" using buttons on the recorder.
Audio set up
In order to use this recorder as a USB speaker
or a USB microphone in the "Olympus
Sonority", connect the recorder to the
PC, then carry out the settings below.
When connecting the recorder for the first
time, the driver will be installed into the
computer.
Start the "Olympus Sonority" and
switch to the Waveform Editing
Screen with the Waveform Editing
Tab [ ].
Uses as a USB Speaker
When the recorder is being used as a USB
speaker, it is possible to output the sound
through the recorder, rather than from the
speakers attached to a computer.
Select [
Recorder Speaker
] from the
[
Tool
] Menu or click [ ] on the Tool
Bar.
The recorder connected by USB connection
can be used as a speaker.
Uses as a USB microphone
When the recorder is used as a USB
microphone, it can used to make recordings
with the "Olympus Sonority", and can
also be used to input data on a computer
using voice recognition software or other
applications.
Select [
Recorder Microfone
] from
the [
Tool
] Menu or click [ ] on the
Tool Bar.
The recorder connected to the PC by USB
connection can be used as a microphone.
Note
• When using it as a USB microphone,
regardless of the recording mode of
this recorder, it becomes the USB stereo
microphone. If you want to connect an
external microphone to this recorder, use
a stereo microphone.