Olympus DM-520 Automobile Battery Charger User Manual


 
19
1
A
HOLD
HOLD
Set the recorder to HOLD mode
Slide the
POWER/HOLD
switch to the
HOLD position.
If you bring the POWER/HOLD switch to the
HOLD position, the current conditions will
be preserved, and all buttons and switches
will be disabled.This feature is useful when
the recorder has to be carried in a bag
or pocket. Also, you can stop to prevent
accident during recording.
• After [
Hold] appears on the display, the
recorder is set to HOLD mode.
Exit HOLD mode
Slide the
POWER/HOLD
switch to the
A position.
Notes
• If you press any button in HOLD mode, the
clock display ashes for 2 seconds, but it
will not operate the recorder.
• If HOLD is applied during playback
(recording), operation is disabled with
the playback (recording) state unchanged
(When playback has ended and the
recording has ended due to the remaining
memory being used up, it will stop).
• This recorder can be eectively operated
via the connected exclusive remote
control set RS30W (optional), even when it
is in HOLD mode.