Filter
Top Products
53
4
Menu setting method
Menu setting method
. LCD/Sound Menu
Backlight
The display will remain lit for about 10 (Initial
setting) seconds when a button on the
recorder is pressed.
1 Select [
Lighting Time
] or
[
Brightness
].
2 Set the lighting time.
[Off]:
Disables this function.
[5seconds] [10seconds] [30seconds]
[1minutes]:
Enables the Backlight function.
3 Set the brightness.
[High] [Low]:
Sets the brightness of the backlight
when lit.
Contrast
Display contrast can be adjusted in 12 levels.
You can adjust the LCD display contrast level from
[01] to [12].
LED
You can set it so the LED indicator light does
not turn on.
[On]:
LED light will be set.
[Off]:
Disables this function. LED light will be
cancelled.
Beep
The recorder beeps to alert you to button
operations or warn you of errors. System
sounds may be turned off.
[Volume3]:
Increase the volume of beeps.
[Volume2]:
Return the volume of beeps to normal.
[Volume1]:
Decrease the volume of beeps.
[Off]:
Deactivate beeps.
Language (Lang)
You can select the display language for this
recorder.
[English] [Français] [Español]:
Guidance
Refer to “Guidance [Voice Guide]” (☞ P.68).
Intro Play (For DM-520)
You can listen to the first few seconds of a
file by touching the cursor to a file within
a folder. This feature is convenient when
looking for files.
[10seconds]:
The first 10 seconds of a file will be played.
[5seconds]:
The first 5 seconds of a file will be played.
[3seconds]:
The first 3 seconds of a file will be played.
[Off]:
Disables this function.