Filter
Top Products
123
8
Accessories
Accessories (optional)
Accessories exclusive to the Olympus IC recorder can be purchased directly from Online Shop
on our company’s website. Sales of accessories are different according to the country.
s USB connecting AC adapter: A514
DC5V AC Adapter for USB connection
s 2 channel microphone (omni-
directional): ME30W
Two ME30 monaural microphones come
in a set with a miniature tripod and a
connection adapter. These are highly
sensitive omni-directional microphones
supported by plug-in power which
are well-suited to recording musical
performances.
s Compact Gun Microphone
(unidirectional): ME31
The directional microphones useful for
recordings such as outdoor recording of
wild birds singing. The metal-cut body
provides a sturdiness to the high rigidity.
s Highly sensitive noise-
cancellation monaural
microphone (unidirectional):
ME52W
This microphone is used to record sound at
a distance while minimizing surrounding
noise.
s Tie clip microphone
(omni-directional): ME15
Small concealing microphone with a
tie-clip.
s
Exclusive remote control set: RS30W
When the receiver is plugged into the
REMOTE jack the recorder’s recording and
stop functions can be operated through the
remote control. The receiving position can
be adjusted, thereby allowing you to operate
the recorder from various different angles.
s Telephone pickup: TP7
Earphone type microphone can be
plugged into your ear while phoning.
The voice or conversation over the phone
can be clearly recorded.
s Ni-MH rechargeable battery:
BR401
High-efficiency rechargeable long life
batteries.
s Connecting cord: KA333
Connecting cord which has stereo
mini-plugs (ø3.5) with resistance at both
ends. Use to connect from the earphone
jack output of the recorder to the
microphone input jack when recording.
Converting plug adapters (PA331/PA231)
which convert to the monaural mini plug
(ø3.5) or monaural mini plug (ø2.5) are
also enclosed.
s Carrying case: CS126
(supplied for the DM-520)
The carrying case for the DM-520, and
DM-420 guards the recorder from
sustaining impact or becoming dirty.
A clip, mike stand and holes for a mini
tripod are attached on the back of the
case.This can also be used as a stand of
the device (turn the tripod screws when
fixing the tripod, and not the recorder).