Filter
Top Products
40
3
+−
button
9 0 button
OK
button
F1
button
PLAY
button
1 Select a file that has a segment
you would like to playback
repeatedly (
☞ P.24 to P.27).
2 In the File list display, press the
+
or
−
button to select the file.
• In the File display, press the 9 or
0 button to select a file.
3 Press the
PLAY
` or
OK
button to
start playback.
4 Press the
F1
button at the point
you want to start segment repeat
playback.
How to begin segment repeat
playback
This function enables repeated playback of
part of the file being played.
• [ ] will flash on the display.
• Fast forwarding and rewinding can
be conducted when [ ] is flashing
in the same manner as during normal
playback, and you can quickly
proceed as far as the end position
(☞ P.37).
• When it reaches to the end of the file
while [ ] is flashing, the point will
become the end position, and repeat
playback will start.
5 Press the
F1
button again at the
position where you want to end
segment repeat playback.
• The recorder repeatedly plays back
the segment until the segment repeat
playback is cancelled.
Note
• As in normal playback mode, playback
speed can be changed during segment
repeat playback as well (☞ P.51). If an
index mark and temp mark are inserted
or eliminated (☞ P.38) during segment
repeat playback, segment repeat playback
will be canceled and it will return to
normal playback mode.
Playback
Playback