Novatel DL-L1 GPS Receiver User Manual


 
Appendix I Optional Mounting Bracket
DL User Manual Rev 3 89
These four nuts are factory-positioned so that the mounting plate can be attached to the DL enclosure using the four flat
screws. Please ensure that the four flat screws are mounted from the countersunk side of the mounting plate.
Once the plate has been attached to the DL enclosure, the entire assembly can then be mounted onto a surface using either
the four self-tapping screws through the screw-mount holes, or the two wood screws through the quick-mount holes.
WARNING: The mounting kit is not designed for use in high-dynamics or high-vibration environments. Contact
your dealer or NovAtel Customer Service if your application requires the DL to be mounted in these types of
environments.
Figure 15: Mounting Bracket Drill Holes Dimensions
Reference Description
1 Radius 6.0, 2 places
2 4 x 3.1 diameter, 6.0 x 90 degrees countersink, far side
3 4 x 5 diameter through
NOTE: All dimensions in Figure 15 are in millimeters.