Filter
Top Products
Appendix F – DL Logs
84 DL™ User Manual Rev 3
Table 21: PDC Status Word Encoding
Field Bit Mask Description
PDC_ST_HW 0x001 Hardware status, 1 = OK
PDC_ST_LINK 0x002 GPSCard link established, 1 = OK
PDC_ST_BATT 0x004 Battery status, 1 = OK, 0 = warn/fail
PDC_ST_TEMP 0x008 Temp status, 1 = OK, 0 = warn/fail
PDC_ST_SLEEP 0x010 Sleep mode, 1 = enabled
PDC_ST_LOGGING 0x020 Logging, 1 = active
PDC_ST_ONSITE 0x040 Site state, 1 = onsite (“site add” command received but not “site leave”)
PDC_ST_TIMESET 0x080 Time established, 1 = OK
PDC_ST_CARDIN 0x100 PC Card presence, 1 = PC Card inserted
PDC_ST_SCHEDON 0x200 Scheduled data collection status, 1 = enabled
PDC_ST_NVMVALID 0x400 NVM valid, 1=OK
PDC_ST_COMBATON 0x800 BAT peripheral power output enabled
PDC_ST_COM5VON 0x1000 5V peripheral power output enabled
PDC_ST_CARDOK 0x2000 No disk-access errors, 1 = no errors