Novatel DL-L1 GPS Receiver User Manual


 
Appendix I Optional Mounting Bracket
88 DL User Manual Rev 3
APPENDIX I - OPTIONAL MOUNTING BRACKET
This appendix includes drawings, photographs, and installation instructions for the optional mounting bracket. This
bracket can be used to attach the DL to a surface or tripod.
Figure 14: Mounting Bracket
5
6
7
1
2
3
4
8
9
Reference Description Reference Description
1 Thread for flat screw 6 Holes to mount plate to enclosure
2 Rectangular nut using flat screw
3 Grub screw 7 Holes to mount assembly to a surface
4 Channel using self-tapping screws
5 Quick mounting holes to 8 Bottom of DL enclosure
mount assembly to surface 9 Front of mounting plate
using wood screws
The mounting kit includes the following materials:
four self-tapping screws (#10-16 x ½ LG)
two wood screws (#10 x ¾ LG)
four flat screws (M3 x 8, 90° countersink)
aluminum mounting plate (see Figure 15 for exact dimensions)
First, the mounting plate needs to be attached to the DL enclosure. There are two channels running the length of the
bottom of the DL enclosure. In each of these channels there are two rectangular nuts, held in place by grub screws.