Filter
Top Products
Appendix E – DL Commands
48 DL™ User Manual Rev 3
BATTERY
This command allows you to select the power source for the system and display battery status. For example, you can
override the DL’s method of selecting the active battery, when two batteries are connected. To do this the desired battery
identifier (A or B) must be specified in the command. Also see Table 9: Power Connector Pin Assignment, Page 41.
Syntax:
BATTERY
[option]
Command Option Description
BATTERY - Command
option (none) If no battery is specified, the status of the currently selected
battery is displayed via a BATA log.
a Select power source A.
b Select power source B.
Examples:
battery
battery b
DEL
This command removes one or more files from the list of stored files on the PC Card. The space occupied by the
referenced file(s) is made available for future logging sessions. This operation is irreversible.
Syntax:
DEL
option
Command Option Description
DEL - Command
option filename This command removes the named file entry from the list of stored log
files. If the specified file is currently open for logging, access will be
denied.
ALL This command removes all file entries from the log storage memory. Even
in the case where a file named ‘all’ exists, this command still removes all
file entries. This command will fail if a log file is open.
Examples:
del 31240201.pdc
del all