Filter
Top Products
TIRE AND LOADING INFORMATION
LABEL
The cold tire pressure is shown on the Tire and
Loading Information label. The label islocated as
shown.
AIR CONDITIONER SPECIFICATION
LABEL
Theair conditionerspecification labelis affixedto
the underside of the hood as shown.
Usethefollowing stepstomount thefront license
plate:
1. Make holes on the plastic finisher at the
location mark (small dimple) using a 0.20 in
(5 mm) drill. Apply light pressure to the drill.
Install the license plate holder using the two
screws provided with the holder.
2. Mount the license plate using two M6-
14mm bolts.
License plate bolt tightening torque:
3.8 - 4.7 ft-lb (5.10 - 6.37 N·m)
WTI0100 WTI0220 LTI0093
INSTALLING FRONT LICENSE PLATE
9-12 Technical and consumer information