Filter
Top Products
Shoulder belt height adjustment (front
outboard seats)
The shoulder belt anchor height should be ad-
justed to theposition best for you.(See “Precau-
tions on seat belt usage” earlier in this section.)
To adjust, pull out
᭺
1
the adjustment button and
move the shoulder belt anchor
᭺
2
to the desired
position, sothe beltpasses overthe centerof the
shoulder. Thebelt shouldbe away fromyour face
and neck, but not falling off your shoulder. Re-
lease the adjustment button to lock the shoulder
belt anchor into position.
WARNING
● After adjustment, release the adjust-
ment button and try to move the shoul-
der belt anchor up and down to make
sure it is securely fixed in position.
● The shoulder belt anchor height should
be adjustedto the position bestfor you.
Failure to do so may reduce the effec-
tiveness of the entire restraint system
and increase the chance or severity of
injury in an accident.
TWO-POINT TYPE SEAT BELT
WITHOUT RETRACTOR (center of
the front bench seat) (if so equipped)
Front seats
LRS0242
LRS0642
Safety—Seats, seat belts and supplemental restraint system 1-19