Filter
Top Products
Resetting fuel economy
The average fuel economy calculation can be
reset to 0. Press the TRIP buttonrepeatedly until
the FUEL ECONOMY menu is shown, then ei-
ther:
● Select the “Reset” key on screen by press-
ing the ENTER button, or
● PresstheTRIP buttonformore thanapproxi-
mately 1.5 seconds.
Distance to empty (MI or km)
TheDistance To Empty(DTE)modeprovides you
with an estimation of the distance that can be
driven before refueling. The DTE is constantly
calculated basedon the amountof fuelin the fuel
tankand theactualfuel consumption.The display
isupdated every30 seconds.When thefuellevel
is low, the DTE display will change to (*).
NOTE:
● If the amountof fuel added while theignition
switch is in the OFF position is small, the
display just before the ignition switch is
placed in the OFF position may continue to
be displayed.
● When driving uphill or rounding curves, the
fuelinthe tankshifts,whichmay momentarily
change the display.
Maintenance items
Press the TRIP button to display maintenance
information or set maintenance intervals for the
following:
● Engine Oil
● Tire Rotation
● Tire Pressure (if so equipped)
Forsetting theTire Pressuredisplay,referto “Tire
pressure information”later in this section.
Changing the maintenance interval
Select the “Engine Oil” or “Tire Rotation” key
using thejoystick andpress theENTER buttonto
display the screen to change the maintenance
interval.
Selectthe“Maintenance Schedule”keyusingthe
joystickand movethejoystick toright orleftto set
the maintenance interval.
LHA0554 LHA0555
Display screen, heater, air conditioner, audio and phone systems 4-5