Filter
Top Products
4. Say: “Newphone”
᭺
C
. The systemacknowl-
edges the command and asks you to initiate
pairing from the phone handset
᭺
D
.
The pairing procedure of the cellular phone
varies according to each cellular phone
model. See the cellular phone Owner’s
Manual for details. You can also visit
www.nissanusa.com/bluetooth for instruc-
tions onpairing NISSANrecommended cel-
lular phones.
When prompted for a Passkey code, enter
“1234”from thehandset. ThePasskey code
“1234” has been assigned by NISSAN and
cannot be changed.
5. The system asks you to say a name for the
phone
᭺
E
.
If the name is too long or too short, the
system tells you, then prompts you for a
name again.
Also, if more than one phone is paired and
the name sounds too much like a name
already used, the system tells you, then
prompts you for a name again.
6. Thesystem asksyou toassign aprioritylevel
᭺
F
. The priority level determines which
phone is active when more than one paired
Bluetoothா phone is in the vehicle. Follow
the instructions provided by the system or
refer to “Setup”later in this section for more
information on changing priorities.
7. Thesystemwill askif youwould liketo select
a custom ring tone
᭺
G
. Follow the instruc-
tions provided by the system or refer to
“Setup” later in this section for more infor-
mation on selecting ringtones.
Making a call by entering a phone
number
Main Menu
“Call”
᭺
A
Number (speak digits)
᭺
B
“Dial”
᭺
C
1. Press the button on the steering
wheel. A tone will sound.
2. Say: “Call”
᭺
A
. The system acknowledges
the commandand announcesthe next setof
available commands.
Say: “CallInternational”to dial morethan 10
digits or any special characters.
3. Saythe numberyou wishto callstarting with
the area codein single digit format
᭺
B
.Ifthe
system has trouble recognizing the correct
phone number, try entering the number in
the following groups: 3-digit area code,
3-digit prefix and the last 4-digits. For ex-
ample, 555-121-3354 can be said as “five
five five” as the 1st group, then “one two
one”as the 2nd group, and “three three five
four”as the 3rd group.For dialing more than
10 digits or any special characters, say “In-
ternational”. See “How to say numbers” in
this section, for more information.
4. Whenyou havefinished speakingthe phone
number, the system repeats it back and an-
nounces the available commands.
5. Say: “Dial”
᭺
C
. The system acknowledges
the command and makes the call.
For additional command options, see “List of
voice commands”in this section.
Receiving a call
When you hear the ring tone, press the
button on the steering wheel.
Once the callhas ended, press the
button
on the steering wheel.
NOTE:
If you do not wishto take the call when you
hear the ring tone, press the
button
on the steering wheel.
4-72 Display screen, heater, air conditioner, audio and phone systems