Filter
Top Products
For additional command options, see “List of
voice commands”later in this section.
LIST OF VOICE COMMANDS
Main Menu
“Call”or “Call International”
“Phone Book”
“Memo Pad”
“Setup”
Whenyou pressand releasethe buttonon
the steering wheel, you can choose from the
commands on the Main Menu. The following
pages describe these commands and the com-
mands in each sub-menu.
Remember to wait for the tone before
speaking.
You can say “Help”to hear the list of commands
currently available any time the system is waiting
for a response.
Ifyou wantto endan actionwithoutcompleting it,
you can say “Cancel” or “Quit” at any time the
system is waiting for a response. The system will
end the VRsession. Whenever the VR session is
cancelled, a double beep is played to indicate
you have exited the system.
If you want to go back to the previous command,
you can say “Go back” or “Correction” any time
the system is waiting for a response.
When you get used to the menus in the system,
you can talk ahead by saying more than one
command at a time. For example, say, “Call five
five five onetwo one two”or “Memo padrecord.”
Also, when you get used to the system re-
sponses, you can skip ahead to the tone by
pressing the
button onthe steering wheel.
However, ifyou press the
button whenthe
system is waiting for a response from you it will
end the VR session.
“Call”
Main Menu
“Call”or “Call International”
Name (speak name)
᭺
A
Number (speak digits)
᭺
B
“Redial”
᭺
C
“Call Back”
᭺
D
Name (speak name)
᭺
A
If you have stored entriesin the Phone Book, you
can dial a number associated with a name and
location.
See “Phone book” later in this section to learn
how to store entries.
When prompted by the system, say the name of
thephonebook entryyouwish tocall. Thesystem
acknowledges the name.
If there aremultiple locations associated with the
name, the system asks you to choose the loca-
tion.
Once youhave confirmed thename andlocation,
the system begins the call.
Number (speak digits)
᭺
B
When prompted by the system, say the number
you wish to call. Refer to “How to say numbers”
and “Making a call by entering a phone number”
in this section for more details.
“Redial”
᭺
C
Use the Redial command to call the last number
that was dialed within the vehicle.
NOTE:
The system will not redial the last number
dialed by the handset keypad.
The system acknowledges the command, re-
peats the number and begins dialing.
Display screen, heater, air conditioner, audio and phone systems 4-73