Nissan 2010 Altima Coupe Automobile User Manual


 
6
AUTOMATIC CLIMATE CONTROL (if so equipped)
01
AUTO BUTTON
Press the AUTO button
01
. Turn the driver’s side temperature control dial
02
to the
desired temperature. This will allow the fan speed, air flow distribution and temperature
to be automatically maintained.
When AUTO is pressed, AUTO will illuminate. When DUAL
03
is pressed, DUAL will
illuminate.
To disable auto mode, press one of the air flow mode control buttons
05
, turn the fan
speed control dial
06
or press the front defroster control button
07
.
02
DRIVER’S SIDE TEMPERATURE CONTROL DIAL
Turn the driver’s side temperature control dial left for cold air or right for hot air.
03
DUAL BUTTON
Press the DUAL button to turn the passenger’s side temperature controls on or off. This will
allow the passenger’s side temperature to be adjusted independently from the driver’s side
control.
04
PASSENGER’S SIDE TEMPERATURE CONTROL DIAL
Turn the passenger’s side temperature control dial left for cold air or right for hot air; doing so
will activate dual mode.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch. When the vehicle
attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch. Release
the switch when the vehicle slows to the desired speed.
To cancel cruise control, push the CANCEL switch or tap the brake pedal. The SET
indicator light in the Vehicle Information Display will go out.
To resume a preset speed, push and release the ACCEL/RES switch. The vehicle
returns to the last set cruising speed when the vehicle speed is over 25 MPH (40 km/h).
To turn off cruise control, push the ON/OFF switch. Both the CRUISE indicator light
and the SET indicator light in the Vehicle Information Display will go out.
01
02 04
06
09 10 07 08 03
05