Filter
Top Products
27
VOICE COMMAND USAGE
Making a Phone Call
1. Push the
switch on the steering wheel. The system
responds with, “Would you like to access Phone,
Navigation, Information, Audio or Help?” The commands
are also displayed on the screen.
2. After the tone, say “PHONE.”
3. The system then displays the five available phone
commands and says: “Please say Dial Number,
Vehicle Phonebook, Handset Phonebook,
Call History or International Call.”
4. After the tone, do one of the following:
Say “DIAL NUMBER” to dial a 7- or 10-digit
phone number only. Then, follow the prompts to
begin saying the phone number starting with the
area code. After the phone number has been
recognized, say “DIAL.” If incorrect, say
“CHANGE NUMBER.”
Say “VEHICLE PHONEBOOK” to say the voice
tag of one of up to 40 phone numbers you have stored in the vehicle.
Say “HANDSET PHONEBOOK” to say the name of one of up to 1,000 contacts down
loaded from your phone handset. (Note: The order of contact information (first name, last
name) transferred depends on the phone manufacturer. The name must be spoken as
shown in the Handset Phonebook list.)
Say “CALL HISTORY” to select between incoming, outgoing and missed call lists.
Say “INTERNATIONAL CALL” to dial a number longer than 10 digits.
Receiving/Ending a Phone Call
There are no voice commands for receiving or ending
a phone call.
To accept the call, push the switch on the steering
wheel or select the “Answer” key on the display. To
reject the call, select the “Reject Call” key. To hang-up,
push the switch or select the “Hang-Up” key.
Pushing the
switch during a connected phone call
will allow you to send digits and special characters.
After speaking the desired digits, press the ENTER
button to send the recognized information.