Filter
Top Products
NISSAN INTELLIGENT KEY™
The NISSAN Intelligent Key™ system allows you to lock or unlock your
vehicle, open your trunk and start the engine.
NOTE: It is important to make sure the Intelligent Key is with you (that
is, in your pocket or purse).
The operating range of the door and trunk lock/unlock function is
approximately 31 in (0.8 m).
Locking the vehicle - Push any door handle Request Switch (if so
equipped)
01
once.
Unlocking the vehicle - Push any door handle Request Switch
(if so equipped)
01
once. The corresponding door will unlock.
Push the door handle Request Switch
01
again within
1 minute; all other doors will unlock.
OPENING THE TRUNK
To open the trunk using the Request Switch (if so equipped),
your Intelligent Key must be with you.
Push the Request/Release Switch (if so equipped)
02
under
the trunk handle.
Lift up on the trunk lid to open the trunk.
STARTING THE ENGINE
Depress the brake pedal (CVT) or clutch pedal (MT).
Push the ignition switch to start the engine.
TURNING THE ENGINE OFF
Shift the shift lever to the P (PARK) position (CVT) or to the
N (NEUTRAL) position (manual transmission) and apply the
parking brake.
Push the ignition switch to turn the engine off.
NISSAN INTELLIGENT KEY™ BATTERY DISCHARGE
If the battery in the Intelligent Key is almost discharged, the
guide light of the Intelligent Key port blinks and the Intelligent
Key insertion indicator is displayed in the vehicle
information display.
To start the engine under these circumstances, insert the
Intelligent Key into the key port in the direction indicated
until it latches into place.
To remove the Intelligent Key from the port, push the ignition
switch to turn the engine off and pull the Intelligent Key out of the port.
The Intelligent Key port does not charge the Intelligent Key battery. If you see the low
battery indicator, replace the battery in the Intelligent Key.
2
01
02