Filter
Top Products
24
MAKING A PHONE CALL
To make a call, follow the procedure below:
1. Press the
button on the steering wheel.
The “Phone” screen will appear on the display.
2. Select “Vehicle Phonebook,” “Call History”
or “Handset Phonebook.”
3. Select the registered person’s name from
the list. Dialing will start.
RECEIVING/ENDING A PHONE CALL
There are no voice commands for
receiving or ending a phone call.
To accept the call, press the
button on
the steering wheel or select the “Answer”
key. To reject the call, select the “Reject
Call” key. To hang-up, press the
button
or select the “Hang-Up” key.
Pressing the
button during a connected
phone call will allow you to send digits and
special characters. After speaking the
desired digits, press the ENTER button to send the recognized information.
HOW TO SAY NUMBERS
The system provides two commands for entering and dialing a phone number: “DIAL” and
“INTERNATIONAL CALL.” The “DIAL” command is used for domestic phone numbers up to
10-digits in length, starting with the area code. The “INTERNATIONAL CALL” command is used
when more than 10-digits need to be dialed or when special characters are required, such as: *,
# or +. When using these two commands, please follow the phone digit speaking rules below:
Only single digits 0 (zero) to 9 (nine) can be spoken.
When saying the phone number 800-662-6200, the system will accept “eight hundred” in
addition to “eight zero zero” or “eight oh oh.” 500, 700 and 900 are also supported.
The long-distance calling prefix “1” is not required when making a call.
“DIAL” COMMAND ONLY
You can say all the digits of a 7- or 10-digit phone number at one time.
For a 10-digit number, saying the phone number in groups of 3, 3 and 4 digits may improve
recognition for some speakers. To use this group dialing method, say only the first 3 digits of
the phone number. After the system recognizes the number, it will request the next 3 digits
and finally the last 4 digits.
If a phone number is incorrectly recognized, you can try entering the phone number again
using the 3-3-4 group dialing procedure by saying, “CHANGE NUMBER.”
“INTERNATIONAL CALL” COMMAND ONLY
You can say the entire phone number at once or in groups of any digit length.
For *, # and +, say “STAR,” “POUND” or “PLUS,” respectively.