Filter
Top Products
20
If the Voice Recognition system does not recognize your voice commands, train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detailed information.
Some commands are not available while the vehicle is in motion.
The “Help” command can be used in any menu to hear a list of available commands.
Please refer to the cellular phone manufacturer’s Owner’s Manual for detailed information
regarding your Bluetooth
®
phone.
For recommended phones and detailed instructions, please visit
www.nissanusa.com/bluetooth.
CONNECTING YOUR PHONE
To use the hands-free feature, you need to set up, or connect, the system to recognize your
compatible cellular phone(s). Five compatible Bluetooth
®
-enabled phones can be connected.
After setup, the system automatically connects with a connected phone when the ignition is in
the ACC or ON position, as long as the phone is on and in the vehicle.
NOTE: Some cellular phones require the user to enable the automatic reconnection feature. Please
refer to the cellular phone manufacturer’s Owner’s Manual for Bluetooth
®
setup information.
CONNECTING PROCEDURE
NOTE: The vehicle must be stationary when connecting the phone.
1. Press the button on the steering wheel. The system announces the available commands.
2. Say “Connect Phone.”
3. The system acknowledges the previous command and announces the next set of available
commands. Say “Add phone.”
4. Initiate connecting from the phone.
The connecting procedure varies according to each cellular phone model. For detailed
connecting instructions and a list of compatible phones, please visit
www.nissanusa.com/bluetooth.
When prompted for a Passkey code, enter “1234” from the handset. (The Passkey code
is assigned by NISSAN and cannot be changed.)
5. Say a name for the phone when the system asks you to provide one. You can give the phone
a name of your choice.
MAKING A PHONE CALL
1. Press the button.
2. After the tone, do one of the following:
Say “Call.” After the system responds, say the name of the person in the phonebook.
Say “Call Phone Number.” After waiting for the tone, say [number]. For example, say “Call
Phone Number.” After waiting for the tone, say “123-456-7891.”
Say “Redial” to redial the previous phone number.
Say “Call Phone Number.” After the system responds, say “Special Number” to dial more
than 10 digits or special characters.
You can say all the digits of a 7- or 10-digit phone number at one time.