7VHF 7200 US and 7200 EU Operation Manual
NAVMAN
1.2 Customizing your Navman VHF Radio
You can customize the radio to suit your individual preferences. Some preferences can be set
directly through the keys as explained in this chapter.
Other preferences are set up through the built-in menus and these are explained in the other
chapters.
1.3 How to display and navigate menus
1. Hold down CALL/MENU. Note that only four menu items can be displayed at any one time
on the screen.
2. Press + CH - to scroll up and down the menu until the cursor is postioned at the desired
option. Press ENT to display that option.
3. Make any entries or changes as explained in the following section.
4. Press ENT to confi rm changes. Otherwise, press ESC to keep the original entry.
5. Press ESC to backup one screen or exit. Any changes are active as soon as you exit the
screen.
1.4 How to Enter Alphanumeric Data
If your radio does not have an alphanumeric microphone, use the + CH - key or the rotary knob
to enter alphanumeric data.
Press - to count through numbers, or hold down to scroll rapidly to the desired number. Press + to
step through the alphabet, or hold down to scroll rapidly to the desired character.
If you make an error, press - until < is displayed, then press ENT to backup and correct the
entry.
If your radio does have an alphanumeric microphone, it is easier to use the keypad directly to enter
the channel numbers and names. Each key has functionality shown below.
Use the CLR key to backup and the ENT key to confi rm, or just wait for the cursor to advance
automatically to the next position when entering data (similar to the modern cell phone
operation).
KEY 0 123456789
Normal
and Menu
Mode
0 123456789
Edit Mode
Push 1
0 123456789
Push 2 Space - A D G J M P T W
Push 3 ( . B E H K N Q U X
Push 4 ) “ C F I L O R V Y
Push 5 % / ? ! : # “ S & Z