Filter
Top Products
30 VHF 7200 US and 7200 EU Operation Manual
NAVMAN
1. Select DSC SETUP, then ATIS FUNC.
2. Select ON (on) to enable the ATIS functionality and automatically disable DSC functionality.
The ATIS annunciator appears on the screen.
It is not possible to have both ATIS ON (on) and DSC ON (on) simultaneously. When you
enable one, the other will turn OFF (off). If DSC and ATIS are both OFF (off), DSC will have
to be switched ON (on) for normal DSC operation.
There are two annunciators in the screen to show you the current mode: if the DSC
annunciator is shown, DSC is operational, if the ATIS annunciator is shown, ATIS is
operational.
4.6 DSC functionality options (DSC FUNC)
DSC functionality can be disabled but this is not recommended.
1. Select DSC SETUP, then DSC FUNC.
2. Press ENT to select ON and to operate the DSC functionality. This will
automatically disable ATIS functionality. The DSC annunciator appears on the
screen.
It is not possible to have both ATIS ON (on) and DSC ON (on) simultaneously. When
you enable one, the other will turn OFF (off). If DSC and ATIS are both OFF (off),
DSC will have to be switched ON (on) for normal DSC operation.
There are two annunciators in the screen to show you the current mode: if the DSC
annunciator is shown, DSC is operational. If the ATIS annunciator is shown, ATIS is
operational.
4.7 Response Type to LL POLLING Calls (LL REPLY)
You can set up the radio to respond to an LL polling request in one of three ways:
AUTO automatically replies to any incoming LL polling requests from any
of your buddies.
MANUAL choose whether to reply automatically or manually to any incoming
buddy polling requests.
OFF ignores all incoming buddy LL polling requests.
1. Select DSC SETUP, then LL
REPLY.
2. Select your response and press
ENT to confi rm and return to the
menu.
LL REPLY
>AUTO
MANUAL
OFF
DSC SETUP
ATIS FUNC
DSC FUNC
>LL REPLY
DSC annunciator
DSC SETUP
ATIS MMSID
ATIS FUNC
>DSC FUNC
DSC FUNC
>ON
OFF