Navman VHF 7200 GPS Receiver User Manual


 
10 VHF 7200 US and 7200 EU Operation Manual
NAVMAN
1.6 Basic Operation and Key Functions
All possible keys and their functions are listed. Note that some of the keys are not available,
depending on your radio model and type of microphone.
Key Function
VOL/PWR Volume and Power. Turn clockwise to power on. Continue to turn
until a comfortable volume is reached. VOL/PWR will also adjust
the settings of an external speaker, if connected.
SQL Squelch or Threshold Level. Sets the threshold level for the
minimum receiver signal. Turn fully counterclockwise until random
noise is heard, then turn slowly clockwise until the random noise
disappears. Make another ¼ turn clockwise for best reception in
open sea conditions.
In areas of high noise (eg close to large cities) reception may
improve if sensitivity is reduced. Either turn SQL slowly clockwise
or use the LOCAL setting. See section 2.3.
DISTRESS Send DSC Distress Call. See Chapter 6
.
16/9 Priority Channel. 7200 US only. Also on the microphone. Press to
cancel all other modes and to tune into the priority channel. Press
again to return to your original channel.
The default is Channel 16. To make Channel 09 the priority channel,
hold down 16/9 until a beep sounds and 09 is displayed.
16 Priority Channel. 7200 EU only. Also on the microphone. Press
to cancel all other modes and to tune into the priority channel,
Channel 16, on high power. Press again to return to your original
channel.
3CH Three Favorite Channels. Also on the microphone. Press to
toggle between your favorite channels. The CH1, CH2, or CH3
symbol appears on the screen to show which favorite channel is
selected.