Filter
Top Products
37VHF 7200 US and 7200 EU Operation Manual
NAVMAN
2. Select SET BUDDY and scroll to the desired buddy. You can set a maximum of three buddies
to track.
3. Select ON (on) to track that buddy or OFF (off) to not track that buddy, and press ENT to
confi rm. (Repeat for the other two buddies if necessary.)
(To delete a buddy from this list, just scroll to the buddy’s name and press ENT. Select YES to
confi rm, and then press ENT again.)
Set the Time Interval as follows:
1. Press CALL/MENU to enter DSC mode, then TRACK BUDDY.
2.
Select INTERVAL, and choose the desired time interval. Press ENT to confi rm.
Start Tracking as follows:
1. Press CALL/MENU to enter DSC mode, then select TRACK BUDDY.
2. Select START TRACK, then YES.
(The START TRACK display changes to STOP TRACK. To stop tracking at any time, just
press YES.)
As soon as you start tracking, an LL Request is sent immediately on CH70 and your radio
waits for acknowledgement of the (fi rst) buddy’s LL position to be displayed on your radio
screen.
Each of the selected buddies is polled for their LL positions at regular time intervals. When
information is received, a friendly ring tone is sounded and the position is shown on the
screen. Pressing any key cancels the screen.
The position that is received is not stored in your radio’s Log, but is broadcast over NAVBUS
to the Chartplotters. Press any key to acknowledge, or wait for the automatic 20 second
timeout.
Note that the 7200 is capable of receiving and displaying the LL position data at normal or
enhanced resolution.
DSC CALL
DIST LOG
LL REQUEST
>TRACK BUDDY
TRACK BUDDY
>START TRACK
SET BUDDY
TRACKLIST
START TRACK
KATHY OFF
SAM ON
BUDDY3 OFF
START TRACK
>YES
NO
PRESS ENTER
DSC CALL
DIST LOG
LL REQUEST
>TRACK BUDDY
TRACK BUDDY
>INTERVAL
INTERVAL
>15 MINUTES
30 MINUTES
1 HOUR