Filter
Top Products
26 VHF 7200 US and 7200 EU Operation Manual
NAVMAN
Chapter 4 - DSC Setup Menu (DSC SETUP)
A valid user MMSID must be entered to access the DSC functions.
4.1 DSC Setup - Menu Options
The following options are available:
Sections 1.3 and 1.4 explain how to navigate around the menu and enter, save and change
data.
4.2 Enter Your USER MMSID (USER MMSID)
This is a once-only operation. You must enter your user MMSID before you can access the
DSC functions.
You can display and read your user MMSID at any time, but you get only one opportunity to enter
your user MMSID.
Enter your user MMSID. See section 4.2. (If you do not have a user
MMSID, see Appendix D.)
USER MMSID
GROUP SETUP
INDIV REPLY
ATIS MMSID
ATIS FUNC
DSC FUNC
LL REPLY
LL RING
Enter or change the name and/or details of a group.
See section 4.3.
Enter or change your ATIS MMSID (7200 EU only).
See section 4.5.
Enable/disable the ATIS function (7200 EU only).
See section 4.5.
Select the type of response to an LL polling request.
See section 4.7.
Turn the DSC operation ON/OFF (on/off).
See section 4.6.
Choose an automatic or manual response to calls (7200 US only). See
section 4.4.
DSC SETUP
>USER MMSID
GROUP SETUP
INDIV REPLY
USER MMSID
INPUT AGAIN
–––––––––
INPUT USER
MMSID
–––––––––
187654321
MMSID
>STORE
CANCEL
Turn the LL response notifi cation ringtone ON/OFF (on/off). See
section 4.8.