Filter
Top Products
29VHF 7200 US and 7200 EU Operation Manual
NAVMAN
ATIS sends a digital message anytime that you release the PTT key. Inland waterways rules
require 1W Tx power on Channels 06, 08, 10, 11, 12, 13, 14, 15, 17, 71, 72, 74, and 77.
4.5.1 Enter or Edit YOUR ATIS MMSID
7200 EU only.
An ATIS MMSID always starts with the number 9. To enter or edit your ATIS MMSID:
1. Select DSC SETUP, then ATIS MMSID.
2. If this is the fi rst time that you are entering your ATIS MMSID, a dashed line appears. Enter
your ATIS MMSID along the dashed line. The fi rst number is always 9. Press ENT to confi rm
each correct entry and to move to the next digit.
If you make an error, press - until < appears, then press ENT to backup and correct the
entry.
If you are editing an existing ATIS MMSID, this will be displayed. Make the required
changes.
3. Press ENT to store your user MMSID.
4. Enter your ATIS MMSID again as a password check, then press ENT to permanently store
the ATIS MMSID and return to the menu.
You can view your stored ATIS MMSID at anytime by selecting ATIS MMSID in the main
menu.
4.5.2 Enable ATIS Functionality (ATIS FUNC)
7200 EU only.
ATIS functionality will operate only after the ATIS MMSID has been entered (see previous
section).
ATIS MMSID
923456789
>STORE
CANCEL
INPUT ATIS
MMSID
9––––––––
INPUT ATIS
MMSID
>STORE
CANCEL
INPUT AGAIN
ATIS MMSID
9––––––––
DSC SETUP
GROUP SETUP
INDIV REPLY
>ATIS MMSID
ATIS annunciator
ATIS FUNC
>ON
OFF
DSC SETUP
INDIV REPLY
ATIS MMSID
>ATIS FUNC