Filter
Top Products
User’s manual NAVIGON 92 Plus | 92 Premium
- 102 - Configuring the Navigation System
Some settings can adopt only the values Yes or No. These settings can
be recognised by the checkbox alongside the setting.
If the checkbox is activated , the value is Yes.
If the checkbox is deactivated , the value is No.
Some settings can adopt many different values. These settings can be
recognised by the (List) button. The current value is visible.
1. Tap on (List).
A list with all possible values opens. The currently valid value is
marked.
2. Tap on the value you want. It is now marked ( ).
3. Tap on OK.
The list will close. The new value is indicated.
Some settings are adjusted by means of a slider, e.g. the settings
Volume of the Assistant, Brightness Day or Brightness Night.
The markings on the slider indicate the current status.
► Tap on the or button to decrease or increase the value.
For each setting there is a (Help) button. When you tap on it you will
see an exact definition of the setting in question.
You can close the settings windows in two ways:
► Tap on OK.
Any changes you have made will be adopted.
► Tap on Cancel.
Any changes you have made will not be adopted.