Filter
Top Products
User's manual NAVIGON 5100 | 5110
Routes with stages - 33 -
7.3 Navigation
The route must be calculated first. You may then begin navigation or
just simulate it.
7.3.1 Calculating and displaying routes
It is possible to calculate and display a planned route on the map even
without GPS reception in order to get an impression of the journey.
The R
OUTE PLANNING window is open. The starting point and at least
one route point have been entered.
1. Tap the Show Route
button.
The map window opens in Preview mode.
The starting point and the route points are marked by flags. For
each stage, the distance and the estimated trip time is given. This
data is also displayed for the entire route.
7.3.2 Simulating routes
It is also possible to simulate navigation.
Note: The reception of GPS-signals is not necessary for simulation.
Simulation is restricted to routes of 60 mi max.
You have calculated and displayed a route.
► Tap on Options > Simulation.
The route will be recalculated for simulation purposes. Simulation
starts when calculation has finished.
Ending simulation
You may end simulation at any time.
► Tap the (Back) button.
A dialog window will prompt you to confirm your decision to cancel
navigation.
The R
OUTE PLANNING window will then open.
7.3.3 Starting navigation
You have calculated and displayed a route.
Route Profile
The calculation of a route is based on so called route options.