Filter
Top Products
User's manual NAVIGON 5100 | 5110
- 22 - Navigation
5.2.1 Specifying the destination country
Above the right-hand upper corner of the uppermost entry field of the
A
DDRESS, POI IN A CITY, and POI OF NATIONAL SIGNIFICANCE windows,
is the Country
button. It shows the country code of the country from
which navigation destinations can currently be entered.
If your destination is in a different country, then proceed as follows:
1. Tap the Country
button.
The C
OVERED COUNTRIES list opens.
2. Tap on the country in which your destination lies.
The C
OVERED COUNTRIES list closes again.
The symbol will display the country code of the destination country.
Note: Only countries of which at least a part is represented on the
currently loaded map may be selected.
5.2.2 Destination address
1. In the MAIN WINDOW, tap on New Destination > Enter an Address.
The I
NPUT SEQUENCE menu opens when you enter addresses for
the USA or Canada (and the corresponding map has been
selected).
1a Select whether you would like to enter the street first and then the
location (Street First
), or first the location and then the street (City
First).
Note: For the following instructions, it is assumed that you have
selected City First
as the order for entering addresses.
The ADDRESS window opens.
2. Enter the name or the postal code of the destination location.
3. Enter the name of the destination street. You can also enter the
name of a well-known object, e.g. "Olympic stadium" or "Eiffel
tower".
4. Enter the house number. If you don't know the number of the
house, or you specified an object in the preceding step, then leave
the field empty.
If you don't know the house number, but know the name of a nearby
side street, then tap on the Cross Street
field and enter the name of
this street. The navigation system will calculate a route to the
intersection of the streets you have specified.