Filter
Top Products
User's manual NAVIGON 5100 | 5110
Before you begin - 11 -
Note: It takes approx. 4-5 hours to charge the device when the battery
is flat.
A fully charged battery enables 4 hours of use.
2.3.2 Inserting a memory card
► Insert the memory card provided into the device (see image). Press
the card into the device until it locks into place.
Removing the memory card
1. Switch the navigation device off by pressing the
(On/Off/Standby
) switch for at least 6 seconds.
2. Press the memory card gently into the device until the lock
disengages.
2.3.3 Preparing the navigation system for use
Caution! Please be sure to refer to the safety information in chapter
"
Important safety information" on page 13.
Securing the cradle
1. Clean that part of the windscreen to which you would like to secure
the cradle. The windscreen must be dry and free of dirt and grease.
2. Using the suction cup, fix the cradle provided to the windscreen.
The cradle should be as level as possible.
3. Press the lever on the suction cup down.
Securing the navigation device to the cradle
The navigation device is secured to the cradle by means of a bayonet
fitting. This connection functions in a similar way to attaching a lens to a
camera or putting the lid on a pressure cooker.