Navigon 5110 GPS Receiver User Manual


 
User's manual NAVIGON 5100 | 5110
- 12 - Before you begin
1. Place the navigation device on the bayonet in such a way that the
bulges on the bayonet ring correspond exactly with the recesses on
the cradle. This is achieved by rotating it approx. 30° to the left.
2. Turn the navigation device clockwise until the bayonet fitting locks
into place.
3. Adjust the navigation device so that it can be seen easily.
Supplying power to the navigation device
Included in delivery of the NAVIGON 5100 | 5110 is a car charger cable
with which power can be supplied to the navigation device via the
vehicle's cigarette lighter.
The car charger cable is connected to the NAVIGON 5100 | 5110 via
the mini-USB-socket
on the bottom of the device.
Caution! The car charger cable is to be connected to cigarette lighters
with an operating voltage of 12V only.
Connecting the TMC-antenna
The NAVIGON 5100 | 5110 has an integrated TMC-receiver. For
optimal reception, you should use the TMC-antenna provided.
1. Connect the TMC-antenna to the headset socket
on the
bottom of the NAVIGON 5100 | 5110.
2. Secure the antenna to the windscreen using the suction cups.
2.4 Navigation with GPS
GPS is based on a total of 24 satellites that circle the earth and, in
doing so, are constantly transmitting their position and time. The GPS
receiver receives this data and calculates its own geographical position
on the basis of the information transmitted by the various satellites.
For a sufficiently precise positioning it is necessary to obtain the data
from at least three satellites. With the data from 4 or more satellites the
altitude above sea level can also be ascertained. The determination has
an accuracy of about 3 yards.
Once the navigation device has determined your position, this position
can be used as a starting point for route calculation.
The map data on your navigation device includes the geographical
coordinates of all digitally recorded points of interest, streets and
places. This enables the device to calculate a route between a starting
point and a destination.