Filter
Top Products
User's manual NAVIGON 5100 | 5110
- 16 - Operating the navigation software
No Signal: Data is being received from less than three satellites.
Position cannot be calculated.
GPS Ready: Data is being received from at least three satellites.
Position can be calculated.
For more detailed information regarding GPS status, please refer to
chapter "GPS status" on page
44.
Energy
The Energy symbol can display the following conditions of the built-in
battery:
The device is being supplied by an external power source. The battery
is being charged.
The device is being supplied by its internal battery. The battery charge
is sufficient.
The device is being supplied by its internal battery. The battery charge
is low.
Direction
The Direction symbol shows you in which direction you are currently
heading. It can show the following points of the compass: N, NE, E, SE,
S, SW, W and NW.
TMC (Traffic Information)
The NAVIGON 5100 | 5110 has an integrated TMC-receiver which
provides the navigation system with up to date traffic messaging. If
necessary, it can alter the route dynamically in order to avoid a traffic
jam for example.
Note: This function is only available if TMC traffic messages are being
transmitted in the country in which you are travelling. This is not the
case in all countries.
The TMC symbol can display the following TMC-reception status:
No Symbol
: There is no TMC receiver connected, or the connected or
built-in TMC receiver is not operational.
Tuning: The TMC-receiver is operational, but cannot find a station that
is transmitting TMC signals.