Filter
Top Products
ATD 50 Actuator
®
Operating Instructions
Page 14
3811 N. Holton Street • Milwaukee, WI • 53212 •USA • Phone • 414-906-4000 • Fax 414-906-4100 • www.MPCovers.com
8 Hardware Error Displays
The microprocessor controller has a red and green LED light in the lower right corner.
The LED lights indicate the general status of the microprocessor.
GREEN LED
The microprocessor controller is operating correctly.
RED LED
Any of the following conditions:
• A software error is detected
• The emergency stop is active
• E-Stop Jumper connection between terminals D1 & D2 is missing
• The motor is overheated
• Controller Failure