Filter
Top Products
Magellan eXplorist Settings
Magellan eXplorist 310 User Manual 29
3. Select the Primary Coordinate Accuracy drop-
down menu and select the desired accuracy.
Setting Primary Coordinate Datum
1. Access the Settings Menu.
2. Select the Navigation button.
3. Select the Primary Coordinate Datum drop-
down menu and select the desired datum.
Setting Secondary Coordinate System
1. Access the Settings Menu.
2. Select the Navigation button.
3. Select the Secondary Coordinate System drop-
down menu and select the desired coordinate
system.
Setting Secondary Coordinate Type
1. Access the Settings Menu.
2. Select the Navigation button.
3. Select the Secondary Coordinate Type
drop-down menu and select the desired
measurement.
Setting Secondary Coordinate Accuracy
1. Access the Settings Menu.
2. Select the Navigation button.
3. Select the Secondary Coordinate Accuracy
drop-down menu and select the desired
accuracy.
Setting Secondary Coordinate Datum
1. Access the Settings Menu.
2. Select the Navigation button.
3. Select the Secondary Coordinate Datum drop-
down menu and select the desired datum.
Selecting North Reference
1. Access the Settings Menu.
2. Select the Navigation button.
3. Select the North Reference drop-down menu
and select the north reference.
Setting Altimeter Source
1. Access the Settings Menu.
2. Select the Navigation button.
Background
This denes what graphic will be used as the
background for the receiver
Assigning Background Graphic
1. Access the Settings Menu.
2. Select the Background button.
3. Select the left and right arrows to set through
the available graphics.
4. Press the joystick to select the Background.
Satellite
Viewing the Satellite Status Screen
1. Access the Settings Menu.
2. Select the Satellite button.
3. Select the Back Icon to exit.
GPS
Turning the GPS Receiver On/Off
1. Access the Settings Menu.
2. Select the GPS button.
3. Select the GPS drop-down menu and select
On or Off.
Navigation
Setting Primary Coordinate System
1. Access the Settings Menu.
2. Select the Navigation button.
3. Select the Primary Coordinate System drop-
down menu and select the desired coordinate
system.
Setting Primary Coordinate Type
1. Access the Settings Menu.
2. Select the Navigation button.
3. Select the Primary Coordinate Type drop-down
menu and select the desired measurement.
Setting Primary Coordinate Accuracy
1. Access the Settings Menu.
2. Select the Navigation button.