Filter
Top Products
Magellan eXplorist 310 User Manual 25
Settings
The Magellan eXplorist has a Settings Menu that allows you to customize how the eXplorist displays
information, run diagnostic tests and other useful functions that will enhance your navigating experience.
The Settings Menu
Accessing the Settings Menu
1. Press the BACK button from the Map screen.
2. Select the Tools icon at the bottom of the
menu.
3. Select Settings from the Tools Menu.
4. The Settings Menu is displayed.
Settings
Brightness and Volume
Adjusting Brightness
1. Access the Settings Menu.
2. Select the Brightness & Volume button.
3. Use the Brightness slider to increase or
decrease the display intensity.
Setting the Backlight Timer
The Backlight Timer turns the backlight off, saving
battery life, if the display has not been touched in
the time selected.
1. Access the Settings Menu.
2. Select the Brightness & Volume button.
3. Select the Backlight Timer drop-down menu
and select the duration that the backlight will
remain on without a screen touch.
Adjusting Volume
1. Access the Settings Menu.
2. Select the Brightness & Volume button.
3. Highlight the Volume slider and use the joystick
to increase or decrease the speaker volume.
Muting the Volume
1. Access the Settings Menu.
2. Select the Brightness & Volume button.
3. Select the Mute button. When checked the
volume is muted.
Power
Setting Active Suspend Timer
This sets the duration that the receiver will remain
on before going into active suspend mode if the
screen hasn’t been touched. Active suspend puts
the receiver in a power save mode but continues to
record your track.
1. Access the Settings Menu.
2. Select Power.
3. Select the Active Suspend Timer drop-down
menu and select the duration that the receiver
will remain active without a screen touch.
Setting Power Off Timer
This sets the duration that the receiver will remain
on before powering off if the screen hasn’t been
touched.
1. Access the Settings Menu.
2. Select the Power button.
3. Select the Power Off Timer drop-down menu
and select the duration that the receiver will
remain on without a screen touch.
Selecting Battery Type
1. Access the Settings Menu.
2. Select the Power button.