Filter
Top Products
Magellan eXplorist Map Screen
Magellan eXplorist 310 User Manual 7
Maps
Additional maps for the eXplorist may be available
from the Magellan Store at www.magellangps.com.
Once the map has been purchased and installed you
will need activate it in your receiver.
Accessing Loaded Maps
1. Press MENU while viewing the Map screen.
2. Select Maps.
3. Choose World Maps or Detailed Maps to see
the individual maps installed.
4. If the map has a checkmark before its name
it has been activated and is in use by your
receiver. You can toggle the map on or off by
Selecting on the check mark box to the left of
the map name.
5. Select the map name to get more detailed
information about the map that is installed.
Pan Mode
Accessing Pan Mode
1. Use the joystick to move the cursor while
viewing the Map screen.
2. The Map screen goes into pan mode.
3. Keep using the joystick to display a point that
you would like to create a route to or a make a
waypoint.
Using the Zoom In and Zoom Out buttons
will help you pick the location quickly and
accurately.
Creating a Waypoint in Pan Mode
1. Select on the map the point at which you want
to create a waypoint.
2. Press MENU.
3. Modify and save the waypoint as described in
the chapter on Waypoints.