Filter
Top Products
Magellan eXplorist Dashboard
Magellan eXplorist 310 User Manual 11
Customizing Data Fields
Setting the Number of Fields Displayed
1. Access the Dashboard screen you want to
change the number of displayed elds.
2. Press MENU.
3. Select Edit # of Fields. (Not available on the
Satellite Status screen.)
4. The current number of elds being displayed is
shown with an arrow above and below it.
5. Use the joystick up or down to change the
number of elds to be displayed. (Note: it
stops increasing when it gets to the maximum
number of elds available for the viewed
dashboard screen. The number of displayed
elds can be set to 0 except for the Data Only
screen which has a minimum of 1.)
Changing Displayed Data
1. Access the Dashboard screen you want to
change the data displayed.
2. Press MENU.
3. Select Edit Nav Fields. (Not available on the
Satellite Status screen.)
4. Select the type of data to be displayed from
the displayed list.
5. The Dashboard screen is displayed with the
data selected displayed.