Filter
Top Products
!
Do not apply pressure to the EASY-PACK
folding luggage-compartment floor when it
is fully open. You may otherwise damage
the hinges of the EASY-PACK folding
luggage-compartment floor.
Opening and closing the folding cargo
compartment floor
A removable insert under the EASY-PACK
folding luggage-compartment floor contains
the parts of the EASY-PACK load-securing kit
and a folding box. Beneath the insert, you will
find the TIREFIT kit, the "Minispare"
emergency spare wheel, the vehicle tool kit,
etc.
X
To open: open the tailgate.
X
Holding the ribbing, press handle :
downwards ;.
Handle : folds upwards.
X
Pull EASY-PACK folding luggage-
compartment floor = in the direction of
the arrow by handle : until it reaches the
desired position and engages in side ?.
X
To close: disengage the EASY-PACK
folding luggage-compartment floor and pull
it back.
X
Press the EASY-PACK folding luggage-
compartment floor down ; until it
engages.
Fitting and removing the folding cargo
compartment floor
X
Remove the combined cargo cover and net
(Y page 282).
120˚ position
X
To remove: move EASY-PACK folding
luggage-compartment floor : into the
120˚ position and lift it upwards.
X
To install: push EASY-PACK folding
luggage-compartment floor : to the stop,
move it into the 120˚ position and make
sure it engages audibly.
X
Pull EASY-PACK folding luggage-
compartment floor : forwards.
EASY-PACK rear sill protector (Estate)
The EASY-PACK rear sill protector is attached
to the underside of the EASY-PACK folding
luggage-compartment floor by means of
magnets. It is designed to prevent clothing
becoming stained and the paintwork being
scratched when loading.
286
Stowage areas
Loading, stowing and features
BA 212 USA, CA Edition B 2011; 1; 5, en-US
dimargi Version: 3.0.3.6
2010-05-20T13:33:46+02:00 - Seite 286