Filter
Top Products
Function
i
Notes/tips
B
Switches the residual heat
function on/off
Use the residual heat function if you want to heat or
ventilate the vehicle interior when the ignition is
switched off. The "residual heat" function can only be
activated or deactivated with the ignition switched
off.
C
Switches cooling with air
dehumidification on/off
Activate climate control using the à and ¿
buttons. The indicator lamps above the à and
¿ buttons light up. You can also set the airflow
and air distribution of the automatic climate control
to one of three levels (FOCUS/MEDIUM/DIFFUSE).
You can set the desired level using button G. The
MEDIUM level is recommended.
D
Switches the rear window
heating on/off
E
Switches climate control on/
off
Activate climate control using the à and ¿
buttons. The indicator lamps above the à and
¿ buttons light up. You can also set the airflow
and air distribution of the automatic climate control
to one of three levels (FOCUS/MEDIUM/DIFFUSE).
You can set the desired level using button G. The
MEDIUM level is recommended.
F
Sets the temperature, right Set the temperature to 72 ‡ (22 †).
G
Sets the climate control to
automatic (FOCUS/MEDIUM/
DIFFUSE)
Activate climate control using the à and ¿
buttons. The indicator lamps above the à and
¿ buttons light up. You can also set the airflow
and air distribution of the automatic climate control
to one of three levels (FOCUS/MEDIUM/DIFFUSE).
You can set the desired level using button G. The
MEDIUM level is recommended.
H
Sets the airflow
I
Sets the air distribution
J
Sets the temperature, left Set the temperature to 72 ‡ (22 †).
Rear control panel
K
Increases the temperature Set the temperature to 72 ‡ (22 †).
L
Display
M
Increases the airflow
Overview of climate control systems
137
Climate control
BA 212 USA, CA Edition B 2011; 1; 5, en-US
dimargi Version: 3.0.3.6
2010-05-20T13:33:46+02:00 - Seite 137
Z