Filter
Top Products
X
Press the : or 9 button to select the
Display Unit Speed-/Odometer.
function.
You will see the selected setting: km or
miles.
X
Press the a button to save the setting.
Selecting the permanent display function
The Permanent Display: function allows
you to choose whether the multifunction
display always shows the outside
temperature or the speed in km/h (USA) or
mph (Canada).
X
Press the = or ; button on the
steering wheel to select the Settings
menu.
X
Press the : or 9 button to select the
Instr. Cluster submenu.
X
Press the a button to confirm.
X
Press : or 9 to select the
Permanent Display: function.
You will see the selected setting Outside
Temperature or Speedometer [km/h]:.
X
Press the a button to save the setting.
Lights
Switching the daytime running lamps on/
off
This function is not available in Canada.
If you have activated the Daytime Running
Lights: function and the light switch is in the
c position the daytime running lamps are
switched on automatically when the engine is
running.
In the dark, the following also light up:
R
the low-beam headlamps
R
the parking lamps
R
the tail lamps
R
the license plate lamp
R
the side marker lamps
X
Press the = or ; button on the
steering wheel to select the Settings
menu.
X
Press the : or 9 button to select the
Lights submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select the
Daytime Running Lights: function.
You will see the selected setting: Enabled
or Disabled.
X
Press the a button to save the setting.
Switching Adaptive Highbeam Assist on/
off
X
Press the = or ; button on the
steering wheel to select the Settings
menu.
X
Press the : or 9 button to select the
Lights submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select the
Adaptive Highbeam Assist: function.
You will see the selected setting: Enabled
or Disabled.
X
Press the a button to save the setting.
Setting the brightness of the ambient
lighting
X
Press the = or ; button on the
steering wheel to select the Settings
menu.
X
Press the : or 9 button to select the
Lights submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select the
Ambient Light Brightness: function.
You will see the selected setting.
X
Press the a button to confirm.
X
Press the : or 9 button to adjust the
brightness to any level from Disabled to
Level 5 (bright).
X
Press the a or % button to save the
setting.
230
Menus and submenus
On-board computer and displays
BA 212 USA, CA Edition B 2011; 1; 5, en-US
dimargi Version: 3.0.3.6
2010-05-20T13:33:46+02:00 - Seite 230