Filter
Top Products
Brakes
Display messages Possible causes/consequences and M Solutions
$(USA only)
J(Canada only)
ABS and ESC
Currently
Unavailable See
Operator's Manual
G
Risk of accident
ABS (Anti-lock Braking System), ESP
®
(Electronic Stability
Program), BAS (Brake Assist), PRE-SAFE
®
, HOLD and hill start
assist are temporarily unavailable. The on-board voltage may be
insufficient, for example. BAS PLUS (Brake Assist PLUS) and PRE-
SAFE
®
Brake may be inoperative as well. In addition, the ä,
å and ! warning lamps light up in the instrument cluster.
ATTENTION ASSIST is deactivated.
The brake system continues to function normally, but without the
functions listed above. The wheels could therefore lock if you
brake hard, for example.
X
Drive on carefully.
If the display message disappears, the functions mentioned
above are available again.
If the display message continues to be displayed:
X
Drive on carefully.
X
Visit a qualified specialist workshop.
$(USA only)
J(Canada only)
ABS and ESC
Inoperative See
Operator's Manual
G
Risk of accident
ABS, ESP
®
, BAS, PRE-SAFE
®
, HOLD and hill start assist are
unavailable due to a malfunction. BAS PLUS and PRE-SAFE
®
Brake
may also have failed. In addition, the ä, å and !
warning lamps light up in the instrument cluster.
ATTENTION ASSIST is deactivated.
The brake system continues to function normally, but without the
functions listed above. The wheels could therefore lock if you
brake hard, for example.
X
Drive on carefully.
X
Visit a qualified specialist workshop.
Display messages
241
On-board computer and displays
BA 212 USA, CA Edition B 2011; 1; 5, en-US
dimargi Version: 3.0.3.6
2010-05-20T13:33:46+02:00 - Seite 241
Z