Filter
Top Products
!
In order to avoid causing damage, push
the head restraints completely into their
guides and click the seat belt buckles into
their guides.
X
Press release catch : and push the head
restraints in fully.
X
Fold backrest ; of the folding bench seat
into its original position until it engages.
Switching the seat heating on/off
Switching on/off
G
Warning!
Repeatedly setting the seat heating to level
3 may result in excessive seat temperatures.
The health of passengers that have limited
temperature sensitivity or a limited ability to
react to excessively high temperatures may
be affected or they may even suffer burn-like
injuries. Therefore, do not use seat heating
level 3 repeatedly.
The three red indicator lamps in the button
indicate the heating level you have selected.
i
If the battery voltage is too low, the seat
heating may switch off.
Driver's and front-passenger seat
Rear compartment seats
9
The system automatically switches down
from level 3 to level 2 after about eight
minutes (driver's seat and front-passenger
seat) or five minutes (rear seats).
The system automatically switches down
from level 2 to level 1 after approximately ten
minutes.
The system automatically switches off
approximately 20 minutes after it is set to
level 1.
X
Make sure that the key is in position 2 in
the ignition lock.
X
To switch on: press button : repeatedly
until the desired heating level is set.
X
To switch off: press button : repeatedly
until all the indicator lamps go out.
9
Only for Canada.
110
Seats
Seats, steering wheel and mirrors
BA 212 USA, CA Edition B 2011; 1; 5, en-US
dimargi Version: 3.0.3.6
2010-05-20T13:33:46+02:00 - Seite 110