Filter
Top Products
56
Getting started
Driving
Turn signals
Combination switch
1 Turn signals, right
2 Turn signals, left
̈ Press the combination switch in
direction of arrow 1 or 2.
The corresponding turn signal indicator
lamp L or K in the instrument
cluster flashes (
୴ page 28).
The combination switch resets
automatically after major steering wheel
movements.
Windshield wipers
Combination switch
1 Single wipe
Wiping with windshield washer fluid
2 Switching on windshield wipers
̈ Switch on the ignition (୴ page 38).
Switching on windshield wipers
̈ Turn the combination switch to the de-
sired position depending on the
intensity of the rain.
0 Windshield wipers off
I Intermittent wiping
II Normal wiper speed
III Fast wiper speed
i
To signal minor directional changes such as
changing lanes, press the combination switch
only to the point of resistance and release. The
corresponding turn signals will flash three times.
!
Do not operate the windshield wipers when
the windshield is dry. Dust that accumulates on
a windshield might scratch the glass and/or
damage the wiper blades when wiping occurs on
a dry windshield. If it is necessary to operate the
windshield wipers in dry weather conditions, al-
ways operate the windshield wipers with wind-
shield washer fluid (
୴ page 57).