Filter
Top Products
291
Controls in detail
Useful features
Power outlet in the rear passenger
compartment
1 Power outlet
2 Cover
̈ Switch on the ignition (୴ page 38).
̈ Pull at top of cover 2.
̈ Flip cover 1 to the left and insert
electrical plug (cigarette lighter type).
Floormats*
Removing
̈ Pull floormats off of retainer pins 2 in
the direction of arrow 1.
̈ Remove the floormats.
Installing
̈ Lay down the floormat.
̈ Press the floormat eyelets 4 onto re-
tainer pins 5 in the direction of
arrow 3.
i
The power outlet can be used to
accommodate electrical consumers (e.g. air
pump, auxiliary lamps) up to a maximum
of 180 W.
Warning! G
Whenever you are using floormats, make
sure there is enough clearance and that the
floormats are securely fastened.
Floormats should always be securely fas-
tened using eyelets 4 and retainer pins 5.
Before driving off, check that the floormats
are securely in place and adjust them if nec-
essary. A loose floormat could slip and
hinder proper functioning of the pedals.
Do not place several floormats on top of
each other as this may impair pedal move-
ment.
i
To install or remove the floormat more easi-
ly, move the driver’s seat or front passenger seat
as far to the rear as possible (
୴ page 42).