Filter
Top Products
181
Controls in detail
Automatic transmission
Gearshift paddles
(example illustration CLK 550)
1 Left shift paddle: limiting gear range or
downshift (in program mode M)
2 Right shift paddle: extending gear
range or upshift (in program mode M)
The following instructions describe opera-
tion of the steering wheel gearshift control
when driving in the automatic program
mode C or S.
Limiting gear range
̈ Briefly pull left shift paddle 1.
The transmission will shift to the next
lower gear as permitted by the shift
program. This action simultaneously
limits the gear range of the transmis-
sion (
୴ page 177).
Extending gear range
̈ Briefly pull right shift paddle 2.
The transmission will shift to the next
higher gear as permitted by the shift
program. This action simultaneously
extends the gear range of the
transmission.
Canceling gear range limit
̈ Pull and hold right shift paddle 2
until
D
reappears in the multifunction
display (
୴ page 174).
The transmission will shift from the
current gear range directly to gear
range D.
i
You cannot shift with the steering wheel
gearshift paddles when the gear selector lever is
in position P, N or R.
Warning! G
On slippery road surfaces, never downshift
in order to obtain braking action. This could
result in drive wheel slip and reduced
vehicle control. Your vehicle’s ABS will not
prevent this type of loss of control.
i
To avoid overrevving the engine when down-
shifting, the transmission will not shift to a lower
gear if the engine’s max. speed would be
exceeded.
i
If you press on the accelerator when the en-
gine has reached its rpm limit, the transmission
will upshift beyond any gear range limit selected.